A1060 Facade Decoration Anode Anodizing Aluminum Expanded Mesh Cladding
General Production Information
Production introduction
Facade cladding is extremely important both for functional and for aesthetical reasons. Vertical external cladding is a filter, a physical bordering, it's a way the building mingles with the environment and it influences the perception we get from the building. Depending on the geographic area, the use, the climate, the design and the budget we can choose from several types of facade cladding. Metal panels, holed and ashlared sheets and metal mesh to make complete facades.
As one of the important facade technical elements in high-rise buildings, expanded aluminum mesh cladding is widely used because of its simple structure, soundproofing, fireproof and easy instrallation. Ares metal is a professional steel mesh manufacturer with 33 years of OEM history. Mainly provide the panel part for the Facade cladding. The panel of the aluminum mesh cladding is mainly welding composed of steel mesh and frame.
Ares metal can provide surface treatments such as painting, anodizing and fluorocarbon coating. Our expanded aluminum is produced from aluminum sheet or coil that is simultaneously slit.
Material: Aluminum 1060
Material characteristics:
1060 aluminum is a 1000-series aluminum alloy: it is considered commercially pure, and is formulated for primary forming into wrought products. 1060 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-1060. A91060 is the UNS number. Additionally, the chemical designation is Al 1060.It can have the lowest tensile strength among the 1000-series alloys in the database.
Surface Treatment: Anode Anodizing
Aluminum anodizing is the electrochemical process that produces a stable film of aluminum oxide on the surface of the aluminum part at room temperature. The oxidation that occurs during the anodizing process creates an extremely hard and abrasion-resistant surface, increasing durability and corrosion resistance.
Why Anodize: Anodizing vs. Powder Coating
- Anodize will not peel, chip, rub or flake off
- Provides better protective layer
- Less susceptible to wear and tear, abuse and weather conditions
- More cost-efficient
- Sunlight-resistant from fading or stains (organic coatings tend to fail when exposed to ultra-violet light)
- Lightweight, adding almost no additional weight to aluminum
Specification
| Thickness |
Strand Width |
Hole Size |
| 2.0 mm |
5.0 mm |
25 × 50 mm |
| 2.5 mm |
5.0 mm |
30 × 60 mm |
| 3.0 mm |
5.0 - 10.0 mm |
40 × 80 mm |
| 2.0 - 3.0 mm |
5.0 - 15.0 mm |
50 × 100 mm |
| 3.0 mm |
20.0 - 30.0 mm |
90 × 200 mm |
| 3.0 mm |
20.0 - 30.0 mm |
100 × 250 mm |
Our advantages:
- We have the capability to customize any size or opening style to meet your specific needs.
- We have a mature R&D team to upgrade our technology.
- We have 33 years of production management experience, and a complete manufacturing chain.
Product Tags:
|
|
Wear Resisting Aluminium Mesh Sheet , Tasteful 1060 Aluminium Mesh Panels Images
|
